Bernina 740E User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Attaching the presser foot holder
Raise the presser foot clamp "a". <i)
Attach the presser foot holder V as
illustrated.
Attaching the presser foot
Lower the presser foot holder *a*until
the cut-out V is directly above the
pin -d". (2)
Raise the lever *e’.
Lower №e presser fool holder *a' and
The presser foot T will engage auto
matically.
Removing the presser foot
Raise the presser foot. (3)
Raise the lever *e* and the foot disen
gages.
Attaching the seam guide
Attach the seam guide 'g' in the slot
as iHustrated. Adjust according to
need for hems, pleats, etc (4)
Attentfon:
Turn power switch to ’0' when
carrying out any of the above
operations!
22