Bernina 740E - Manual (Page 47)

Sewing wfth the Hemmer foot
>U00el 704E
For hems in fine or sheer fatKics.
Set the machine a$ illustrated. (1)
Neaten the edge of the tabnc. At the
beginrung of the hem. turn under the
edge twice by about 3 mm ('/»’) and
sew 4-5 stitches to secure Pull the
thread slightly towards lire back. In­
sert the r>eedie into the fabric, raise
the presser foot and guide the fold
into the scroll on the tool. (2)
Gently pull the fabric edge towards
you and lower the presser foot. 8egm
sewing, guiding the fabric into the
scroll by hokjif^g it upright and slightly
to the left (3)