Installation information, Awarning – Brinkmann GRAND GOURMET 6345 User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
AWARNING
FOR OUTDOOR USE ONLY. DO NOT operate indoors or in an enciosed area such as a garage,
shed or breezeway.
Use your griii OUTDOORS in a weii ventiiated space away from dweiiings or other buiidings to
prevent dangers associated with gas accumuiation and toxic vapors. We recommend your griii
be situated at ieast 10 feet (3.1 m) from buiidings.
Maintain a minimum ciearance of 36 inches (91 cm) between aii sides of griii and waiis or other
combustibie materiai. DO NOT use griii under overhead unprotected combustibie construction.
DO NOT use or instaii this griii in or on a recreationai vehicie and/or boat.
INSTALLATION INFORMATION:
The installation of this appliance must be in accordance with:
All applicable local codes, or in the absence of local codes, either:
•
National Fuel Gas Code ANSI Z223.1 NFPA 54
•
Natural Gas and Propane Installation Code: CAN/CGA B149.1
•
Natural Gas Installation Code: CAN/CGA B149.1 (Canada)
•
Propane Installation Code: CAN/CGA B149.2 (Canada)
To check your local codes, see your local LP gas dealer or natural gas company. This grill was not
intended to be connected to a natural gas supply line. If an external electrical source is utilized, it
must be electrically grounded in accordance with local codes, or in the absence of local codes, with
the National Electrical Code, ANSI/NFPA 70, or the Canadian Electrical Code, CSA 22.1.
A
warning
LP GAS CYLINDER
(NOT
supplied
with
this
grill
)
The LP cylinder is avaiiabie for purchase at the same iocation the griii was purchased.
The LP (Liquid Propane) gas cylinder specifically designed to be used with this grill must have
a 20 lb. (9.1 kg) capacity incorporating a Type 1 cylinder valve and an over-filling protection
device (OPD).
DO NOT connect this grill to an existing #510 POL cylinder valve with Left Hand threads. The
Type 1 valve can be identified with the large external threads on the valve outlet.
DO NOT connect to a propane cylinder exceeding this capacity.
DO NOT connect to a cylinder that uses any other type of valve connection device.