Aiwa CX-NA303 - Manual (Page 11)

RANDOM /REPEAT PLAY
Use the remote control.
RANDOM play
All the tracks on the selected disc or all the discs can be played
randomly.
REPEAT play
A single disc or all the discs can be played repeatedly.
Press RANDOM/REPEAT while pressing SHIFT .
Each time it is pressed, the function can be selected cyclically.
RANDOM play — RANDOM lights up on the display.
REPEAT play — C*. lights up on the display.
RANDOM/REPEAT play — RANDOM and light up on the
display.
Cancel — RANDOM and Ci. disappear from the display.
To play all discs, press ► to start play.
To Play a single disc, press one of DISC DIRECT PLAY 1-3 to
start play.
During random play it is not possible to skip to the previously
played track with
3 Press numbered buttons 0-9 and +10 to program
a track.
Example:
To select the 25th track, press +10, +10 and 5.
To select the 10th track, press +10 and 0.
Selected track number
Total number of
selected tracks
|-^ 3' ,/p
Program number Total playing time of
the selected tracks
4 Repeat steps 2 and 3 to program other tracks.
5 Press ► to start play.
To check the program
Each time ◄◄ or ►► is pressed in stop mode, a disc number,
track number, and program number will be displayed.
To clear the program
Press ■ CLEAR in stop mode.
To add tracks to the program
Repeat steps 2 and 3 in stop mode. The track will be programmed
after the last track.
a
z
►
<
a
a
Q
PROGRAMMED PLAY
Up to 30 tracks can be programmed from any of the inserted
discs.
To change the programmed tracks
Clear the program and repeat all the steps again.
To play the programmed tracks repeatedly
After programming the tracks, press RANDOM/REPEAT
repeatedly until c^. appears on the display.
During programmed play, you cannot perform random play,
checking the remaining time, and selecting a disc or track.
Use the remote control.
1 Press PRGM while pressing SHIFT in stop mode.
“PRG” is displayed .
?i";
2 Press Disc DIRECT PLAY 1-3 to select a disc.
Go to the next step when the tray stops rotating.
ENGLISH
1 0