2 connect the surround speakers to the main unit – Aiwa XR-M75 User Manual
Page 4
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PREPARATIONS
J
Check the AC voltage
The rated voltage of your unit shown on the rear panel is 120 V
AC. Check that the rated voitage matches your local voltage.
IMPORTANT
Connect the speakers, antennas, and all optional equipment first.
Then connect the AC cord in the end.
Speakers
There are no difference between the front speakers as well as
the surround speakers. Both speakers of its kind can be
connected as L (left) or R (right).
1 Connect the right and left speakers to the main
unit.
Connect the right speaker cord to
SPEAKERS R
terminals,
and the left to
SPEAKERS L
terminals.
The speaker cord with the white stripe should be connected
to the O terminal and the black cord to the © terminal.
2 Connect the surround speakers to the main unit.
Connect the right surround speaker cord to
SURROUND
SPEAKERS R
terminal, and the left to
SURROUND
SPEAKERS L
terminal.
3
ENGLISH