Avanti HUM2000 - Manual (Page 10)

lower plate into place and fasten it by sliding the two plate lock buttons
J'-'ofc- Ta insure maamijir) cleaning efficiency, ilte belt sfioeld be checked regularly to make sure li is m good conoiiion
Ciieci' to see if the belt is stretched, cracked, or if excessive slipping is occurring Replace i! neepeef
> CLEANING THE NOZZLE
The nozzle hose located on the back of the vacuum cleaner carries the dirt from the nozzle to the dust
bag If the hose should become clogged:
1 Remove the nozzle hose from the housing and clean the hose of any obstructions
the hose back into the housing. Replace the dust bag with new bag.
Replace
If the clog still exists, place the handle in the upright locked position. While the cleaner is
running, disconnect the nozzle hose from where it enters the nozzle. Stretch the hose in and
out to remove the clog.
If the clog still exists turn the vacuum cleaner “OFF", unplug the power cord and turn the
vacuum cleaner over exposing the underside. Remove the lower plate as described in the
proceeding section. Remove the nozzle pipe from the housing by pulling it straight out.
Inspect the hose and nozzle pipe, and clear them of any obstructions. Reinstall nozzle pipe
and lower plate. Reinstall nozzle hose.
SERVICE FOR YOUR VACUUM
We are proud of our customer service organization and the network of professional service
technicians that provide service on your Avanti appliances. With the purchase of your Avanti vacuum,
you can have the confidence that if you ever need additional information or assistance, the Avanti
Products Customer Service team will be here for you. Just call us toll-free.
AVANTI PRODUCTS CUSTOMER SERVICES
Product Information Whatever your questions are about our products.
800-323-5029 help is available.
Part Orders You may order parts and accessories that will be
800-220-5570 delivered directly to your home.
You may order these items by persona! check.
money order. Master Card, or Visa.
10