Avanti HUM2000 - Manual (Page 7)

y Warningy
Improper use of the power cord can result in the risk of electrical shock. If the power cord
is damaged, have it replaced by an authorized Avanti Products service center.
ASSEMBLING YOUR VACUUM
> ATTACHING THE HANDLE
The vacuum cleaner's main body and handle are packed separately.
1. The handle screws have been installed for shipping purposes. Remove the
screws before inserting handle. Insert the handle as shown in the illustration.
Make sure the On/Off Switch on the handle is. in the Off position before
installing.
2. Insert the screws that you removed. Be sure the screws are tightened but
not over tightened.
3. A special clip is provided on the upper cord storage hook. This is used to
help secure the cord. Always keep the power cord under the dip to keep the
cord from being damaged.
4 Always wrap the cord around the cord storage hooks when storing,
> RELEASING THE CORD
1, The upper cord storage hook has a quick-release action. To release the
cord, rotate the hook downward and complete power cord will drop off the
hook for immediate use.
2. Return the hook to the upright position before attempting to rewind the cord.
Do not unplug the power cord by pulling on the cord. Grasp the plug head
and pull to unplug unit.
> HANDLE ADJUSTMENTS
The handle may be set to any position required. Just step on the button as indicated
by the illustration and lower the handle as desired,
1. Upright position. The handle locks in this position for storage. The handle
should always be in an upright position when cleaning tools are used.
2. Middle position. This position is for normal cleaning.
3. Low position. This position is used for cleaning under furniture.
s
h
> ONfOFF SWITCH
1. To start the vacuum cleaner, push the switch on the body of the vacuum
cleaner to the ON position.
2. To stop the vacuum cleaner, return the switch on the body of the vacuum
cleaner to the OFF position.
> VARIABLE SPEED CONTROL
Plug cord into electrical outlet ensuring the voltage is correct. Switch the power switch to the On
position to turn cleaner on. Adjust the speed control knob to desired suction strength.
> USING THE ATTACHMENTS