CyberResearch CYRAQ 21A - Manual (Page 27)

CyberResearch
® Displays C Y RAQ™ 21
2.3.2 Panel Mounting the Monitor
1. Panel cutout is 356mm H x 440mm W for landscape installation (Figure 6).
2. Install C
Y RAQ in panel cutout. Ensure all studs clear cutout opening and Poron ™
gasket on the rear of the unit is flush against panel (critical for NEMA
compliance).
3
N OTE
: Steps 3 & 4 require a second person
3. Align studs on the C Y RAQ with the holes in mounting plate from the rear of
panel (as seen in Figure 6).
Important!
Do not exceed 30 in/lbs when tightening mounting nuts.
4. Also from rear of the panel, second person must install and tighten the fourteen
10-32 mounting nuts.
Figure 6: Panel-Mount Landscape Installation
CyberResearch, Inc . 17
25 Business Park Drive P: (203) 483-8815; F: (203) 483-9024
Branford, CT USA www.cyberresearch.com