CyberResearch CYRAQ 21A - Manual (Page 50)

C Y RAQ™ 21 CyberResearch
® Displays
3.2 Adjusting the Display
3.2.1 Auto Adjustment
The Auto Adjustment feature allows users to quickly adjust the display’s settings to
optimum level.
1. To initiate the Auto Adjust feature, press the Auto button.
3
N OTE
: Expect the display to darken while a progress bar appears, see Figure 22. The
process will take approximately 15 seconds.
Figure 22: Auto Adjustment Progress Bar
Auto Adjustment
62
3.2.2 Brightness
Adjusting the Brightness level can be accomplished without actually prompting the full
OSD (using the Menu button). To adjust the display’s brightness:
1. Press either the Plus or Minus button on the front of the display.
¾ The Brightness indicator bar appears, see Figure 23.
2. Press either the Plus or Minus button to adjust the setting.
3. When done, press Exit.
Figure 23: Brightness
81
Brightness
40 ©Copyright 2005 CyberResearch, Inc