Cannon CHESTER 10540G - Manual (Page 8)

SETTING THE TIME OF DAY
Step 1 Make sure all oven controls are turned Off.
Step 2 Check the electricity supply to the cooker is turned on.
When switched on the display will show 0.00 and "A" symbol, both will
be flashing intermittently.
Step 3 Press & hold in both the "Cook Period & End Time" buttons
together.
Step 4 With the "Cook Period & End Time" buttons still held in,
press either the "+" or "–" buttons to set the correct time of day.
Step 5 Release all the buttons simultaneously.
The time of day is now set and the symbol will light up to show
that the timer is in "Manual Mode"
To change the time of day repeat Steps 3, 4 & 5 above.
Note: You cannot adjust the time of day if the timer has been set for
an Auto Cooking Programme.
SETTING THE MINUTE MINDER
Step 1 Ensure the time of day is set correctly.
Step 2 Press and hold the Minute Minder Button.
Step 3 With the "Minute Minder" button held in, set the required Minute
Minder time using the "+" and "–" buttons, a symbol will light up.
Release all buttons and the timer display will revert back to the time of day. Bell
symbol will remain lit to signify that a Minute Minder period has been set.
At the end of the set time a bleeping sound will be heard, and the symbol
will go out.
The bleeping sound will continue for several minutes unless cancelled (see step 4)
Step 4 To cancel the bleeping sound press the Minute Minder button, timer
display will revert back to the time of day after the buttons are
released.
To cancel Minute Minder before the Minute Minder period has finished.
Step 1 Press the minute minder button.
Step 2 Press the "_" button until 0.00 and the symbol appear in the
display window.
Step 3 To cancel the bleeping sound press Minute Minder button.
8
TIMER OPERATION
Note 1 When the Minute Minder has been set, the time remaining can be checked
at any time by simply pressing the Minute Minder button