Datamax DMX E E-4204 - Manual (Page 53)

E-Class 43
5.2 Media Width Adjustment
A Thumbwheel on the side of the Printhead Carrier Assembly allows the
printhead to be adjusted for various sizes of media. When adjusting for
narrow media move the Thumbwheel to the left (clockwise); conversely,
when adjusting for wide media move it to the right (counterclockwise).
;
Note: The numbers on the Thumbwheel are for reference only and do not
correspond to specific media widths.
To perform a media width adjustment, proceed as follows:
1. Load media into the printer. Print a label (press the
+
buttons
simultaneously) and examine it.
2. If the printing appears too light on the right-hand side of the label (see
example below), then move the Thumbwheel counterclockwise. Print
another label and examine it; make additional adjustments as
necessary.