Troubleshooting, Reset button – Aiwa CDC-XI User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
TROUBLESHOOTING
In the following cases, the corresponding error code indicator is displayed.
Error code
Cause
Solution
E-2, E-3, E-6, E-8
The disc is not inserted or ejected
properly.
Press RESET and insert the disc
again.
E-4, E-5, E-7
The disc cannot be read properly.
The disc may be damaged or
dirty. Insert another disc.
E-9
The ambient temperature is too
high.
Allow the unit to cool off (by
moving the car out of direct
sunlight, etc.).
m
3
ID
»■
S'
Reset button
RESET
The reset button (RESET) is located on the front side of the unit behind the control panel (see
“DETACHING THE CONTROL PANEL” on page 4).
If the unit does not operate properly, press RESET with a pointed object such as a pencii, etc. to reset
it. Note that the memory contents are erased when pressing RESET.
17