Sound adjustments, Note, To set the turn-on volume level – Aiwa CDC-XI User Manual

Page 7: Irs—tre^jrl—frj, Tf?e

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

SOUND ADJUSTMENTS

m

3

(Q

1 Press MODE to select the mode you want to adjust

from VOL (volume), BAS (bass), TRE (Treble), BAL
(balance), and FAD (fader).

The mode indicator lights up in the following order.

IRS—TRE^JRL—FRJ

r

irni .

V

Ul_

The selected mode changes to the volume mode when MODE

is pressed for more than 5 seconds.

2

Press ▲ or ▼ (for less than 0.5 seconds) to adjust

the sound quality.

To change the level rapidly, press and hold

A

or

T

down

longer.

A

side

▼ side

l/ril

V Ul_

Increases the

volume level.

Decreases the

volume level.

1R5

Increases the bass

level.

Decreases the bass

level.

TF?E

Increases the treble

level.

Decreases the treble

level.

SRL

Decreases the level

of the left

speaker(s).

Decreases the level

of the right

speaker(s).

C O T )

rnjL!

Decreases the level

of the front

speakers.

Decreases the level

of the rear speakers.

Note

• Without selecting any mode with MODE, only the volume level can be adjusted by pressing

A

or

T.

LOUD (loudness) function

Press LOUD

to reinforce bass and treble especially when listening at low volume level. To cancel the

loudness, press LOUD again.

To set the turn-on volume level

The unit can be set to always turn on at the same volume level.

After adjusting the volume with

A

or

T,

press and hold POWER down for more than 2 seconds until a

beep tone is heard.

Advertising