American Standard Moments T506.60X User Manual
Page 3
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUST HOT LIMIT STOP
HOT LIMIT SAFETY STOP ADJUSTMENT
By restricting handle rotation and limiting the amount
of hot water allowed to mix with the cold, the HOT LIMIT
SAFETY STOP reduces risk of accidental scalding. To set
the maximum hot water temperature of your faucets, all
you need to do is adjust the setting on the HOT LIMIT
SAFETY STOP
■ Use a flat blade screwdriver or your fingers to pull
up and rotate red HOT LIMIT SAFETY STOP И).
Follow Step "A" or "B" to adjust min./max. discharge
temperature. "0" being the hottest to "7" the coldest
temperature setting. Factory set at "0".
D
INSTALL DIVERTER KNOB, TUB SPOUT, SHOWER HEAD,
SHOWER ARM WITH FLANGE
Thread DIVERTER KNOB
(1)
onto DIVERTER STEM
[ 2 ] .
Remove pipe cap and plug from shower and tub
rough piping.
Install SPOUT ESCLfTCHEON
(3)
onto TUB SPOLfT
(5).
Apply sealant or Teflon tape to threads of tub filler
nipple. Thread TUB SPOUT
(5)
onto tub nipple.
CAUTION: Protect finish on TUB SPOUT when
insteiiing.
Install SHOWER ESCUTCHEON
(S)
onto SHOWER
ARM
(7).
Apply sealant or Teflon tape to threads on
both ends of SHOWER ARM
I7J
and thread longer
leg of SHOWER ARM
(7)
into shower elbow.
Thread SHOWER HEAD
(8)
onto SHOWER ARM
(7J.
CAUTION: Protect finish on SHOWER HEAD and
ARM when instaiiing.
PLUG
TUB FILLER
NIPPLE
M968952