Removing the filter, Carbon filter – AEG 222D User Manual
Page 15
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Removing the filter
Open the grid and remove the stops M to take out the filter. See
Fig. 7.
Carbon filter
• The activated carbon filter should only be used if you want to use
the hood in its filtering function.
• To do this you will need an original AEG activated carbon filter
(see special accessories).
• This filter cannot be cleaned or reused.
• As a general rule, the activated carbon filter should be
changed once every four months.
• Mounting - Fig 8
a. Fit first rearwards on the proper seats.
b. Then fix frontwards the carbon filter using hooks C.
• Dismounting :
Unhook the carbon filter from its housing pushing hooks C.
• Always specify the hood model code number and serial number
when ordering replacement filters. This information is shown on
the registration plate located on the inside of the unit.
• The activated carbon filter can be ordered from the AEG Service
Force.
1 5