One touch dialing, To store a number into one touch memory, To place a call to a number in one touch memory – Audiovox MVX-550 User Manual

Page 16: Voice mail dialing, To store numbers, To place a call, Call restriction (nam option), To set call restricted mode, To exit call restriction programming mode

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ONE TOUCH DIALING

This feature permits you to place a call by a single key

stroke.

To Store a Number into One Touch

Memory

1. Press , then enter a phone number,

2. Press iSlKSi. then the One Touch Key

H then

Stored numbers can be reviewed by pressing

1

the One Touch Key you want to review.

To Place a Call to a Number in One

Touch Memory

Press the One Touch Key for approx. O.Ssec..

The last 10 digits of the number will be displayed on the

readout, and the

indicator will light as a call is

placed.

VOICE MAIL DIALING

This feature permits you to access, through telephone

lines, a computer system and send DTMF number codes in

sequence. Up to five numbers can be stored and are

sequentially accessed with one touch of the “Voice Mail

Access” key. The first number is sent in digital form to the

cell site, then up to four other numbers are sent with

DTMF signaling.

To store Numbers

Store the numbers to be linked into the special memory

address 91 through 95, Each number should be within 16

digits.

To Place a Call

Press “Voice Mail Access” key for approx. 0.5sec.. The

first number in memory address 91 will appear on the

readout and will be sent digitally to the cell site. After you

hear the signal from the Operating Office, press “Voice

Mail Access” key again. The second number is memory

address 92 will appear on the readout and is sent with

DTMF tones. You will monitor the tones through the

loudspeaker. The third through fifth number in memory

address 93 through 95 can be accessed sequentially in the

same manner as above.

CALL RESTRICTION

(NAM OPTION)

This feature permits you to impose various kinds of

restrictions on Outgoing Calls.

To Set Call Restricted Mode

L key

Enter the three-digit security code, then press
The following key operation is needed to activate one of

the restricted modes:

81

: Only phone numbers having 11 digits or less are

accepted. Operator assisted dialing is prohibited.

^ :

Only phone numbers having 7 digits or less are

accepted. Operator assisted dialing is prohibited.

^ :

Operator assisted dialing (0 Origination) is pro­

hibited.

: No phone calls can be placed except for repertory

dialing from memory address 01 to 09, However,

programmable emergency call will be available.

: Only One Touch dialing is permitted. However,

programmable emergency call are available.

H : No restriction.

To Exit Call Restriction Program­

ming Mode

When in the restriction mode 4, number stor­

age into the memory will not be permitted.

In the restriction mode, a short beep tone will

be heard to inform you of the improper opera­

tion, and the word iWfetdiiBiii will be shown

on the readout.

Press
Note: (1)

(2)

29

30

Advertising