Audiovox MVX-550 - Manual (Page 17)

END-TO-END SIGNALING
This feature permits you to utilize additional phone
services, such as accessing an alternate long distance
network, signaling pager, or banking by phone etc..
For these services the signaling should be in DTMF
(Touch Tone'^'^). The following two features will make it
easier to send in DTMF codes.
Note; When you use this feature with a secret number,
the number must be previously stored in a memory
address. (Refer to “To Store the Secret Number”.)
Touch Tone™ from Memory
DTMF signaling by repertory dialing is available while
engaged in a telephone conversation,
1. ih'ess then enter the repertory memory
address (01 through 99).
The last 10 digits of the number will appear on the
readout.
Note: However, if the memory address entered has
been set as a secret memory,
will be displayed on the
readout instead of the number.
2. Press iSiSS^. Then DTMF signaling will be placed
and the DTMF tone can be monitored through the
speaker.
Note: Continuous DTMF from keypad can be manually
dialed as well to access answering machines when
engaged in a telephone call.
Link Dialing
This feature permits you to pre-set from repertory memoiy
or the keypad up to five numbers before placing a call.
With this feature, the first number is sent in digital form
to the cell site. Then up to four other numbers can be
sent with DTMF signaling by simply pressing
for each additional number.
Note: (1) Each number to be linked may be recalled
from memory or entered by keypad.
(2) Each number to be linked should be within 16
digits including linking mark “=” at the end.
(3) Linked number can be stored in the memory.
However, number of more than 16 digits
should be stored into memory address 96
through 99.
31
Example; To access the alternate long distance service
using a secret number, you should call your
long distance service office first, and enter
your ID number, then the phone number to
be placed.
1. Recall the phone number of the long distance service
office,
Press , then enter the memory address (01
through 99).
EEllli
2
.
Press then key H ,
Linking Mark “=” will be added at the end of the
number and HlMil will appear. _____
3. Recall your ID number stored with secret attribution.
3-1.Enter the three-digit security code.
Press keys IMI SI, IS .
Note; When you recall the ID number stored
without the secret attribution, omit the
step 3-1 and proceed to next step 3-2,
3-2. Recall the secret memory (ID number).
Press key S] then Hi .
4. Press then key
5, Recall or dial the phone number to be called.
Press then enter the memory address (01
through 99) to recall the phone number to be called.
6. Press »OL The
call is placed.
indicator will light as the
will appear on the readout.
After you received an answer from the long distance
service office, press again. The DTMF signal
vrill be placed and the DTMF tone of your ID number
can be monitored through the speaker,
will appear on the readout.
32