Aiwa AV-D55 - Manual (Page 11)

DSP SURROUND
DSP MULTI JOG
DSP
MANUAL
SELECT
DOWN,UP
The DSP (Digital Signal Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain the
sound presence of real environments. There are four modes with
matching graphic equalization modes. Equalization modes are
selected automatically and can also be selected or turned off to
suit your preference.
Press the DSP button, and turn the MULTI JOG until
the desired DSP mode is displayed.
The selected mode name is displayed for four seconds, and the
indicators ► appear on the left sides of the selected DSP name
and matching GEQ mode name.
Selected DSP mode
■ I Li.0
Ll?.iZ'l 1 .-iJL i'- .'y':' U ..i'SW
To cancel the selected mode
Press the DSP button again. “DSP OFF” appears on the display.
Even if canceling the selected DSP mode, the matching or
selected GEQ mode still remains.
To select with the remote control
Press the DSP button repeatedly until the desired DSP mode is
displayed.
Four DSP modes and “DSP OFF” can be selected.
To adjust the volume and balance of the surround
speakers
Press the MANUAL SELECT button on the remote control twice
or three times, while the DSP system is turned on, to display “S­
R OdB” (for right surround speaker) or “S-L OdB” (for left surround
speaker). Then press the DOWN or UP button repeatedly within
four seconds.
Note that the surround speakers volume and balance of the 5.1
CFI and Dolby Pro Logic modes are also changed.
NOTE
' The DSP system is automatically canceled:
- when the Dolby Pro Logic is turned on
- when the 5.1 CH function is selected
' The DSP system cannot be turned on:
- while the 5.1 CFI function is selected
- while headphones are plugged in
C
(O
Matching GEQ mode
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DANCE,
FIALL or ARENA is selected, no sound will be heard from the
surround speakers.
ENGLISH
1 0