About the remote control, Inserting batteries, Power economizing (eco) mode – Aiwa AV-D55 User Manual

Page 7: When to replace the batteries, Using the remote control, To cancel the eco mode, Operating cd player with this remote control

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

ABOUT THE REMOTE CONTROL

Inserting batteries

Detach the battery cover on the rear of the remote control and

insert two R6 (size AA) batteries.

POWER ECONOMIZING (ECO) MODE

li)

z

O

IX

II
X

X

When to replace the batteries

The maximum operational distance between the remote control

and the sensor on the unit should be approximately 5 meters

(16 feet). When this distance decreases, replace the batteries

with nevif ones.

Using the remote control

The instructions in this manual refer mainly to the buttons on the

main unit. Buttons on the remote control with the same names

as those on the main unit can be used as well.

The SET button functions in the same way as the ENTER button

on the main unit.

• If the unit is not going to be used for an extended period of

time, remove the batteries to prevent possible electrolyte

leakage.

• The remote control may not operate correctly when:

- The line of sight between the remote control and the remote

sensor in the display window is exposed to intense light, such
as direct sunlight.

- Other remote controls are used nearby (those of television,

etc.)

Setting this unit to the ECO mode reduces power consumption

as below.

Initial setting of the ECO mode is ON.

• When the current time is set, the clock display disappears

immediately,

• While the power is off, all the display lights turn off, and only

the POWER <!)STANDBY/ON indicator lights in red.

To cancel the ECO mode

1 Press the ECO button to display ECO MODE while the unit is

turned on.

2 Within 4 seconds, press the ENTER button.
3 Within 4 seconds, turn the MULTI JOG to select ECO OFF.

The mode will be automatically set after 4 seconds. It will

also be set If the ENTER button is pressed within 4 seconds
after step 3.

Operating CD Player with this Remote control

You can control basic functions of Aiwa CD players with this

remote control as follows. (For more details, refer to the operating
instructions of the CD player.)

To play, press the ►/!! button.
To stop play, press the ■ button.
To pause play, press the ►/!! button. To resume play, press
again.
To search, keep the ►►!/► or button pressed and release
the button.
To skip, press the ►►!/► or

button repeatedly.

To skip discs

Press the

DISC SKIP

button to skip a disc and press the ►/!!

button to play the next disc.

ENGLISH

Advertising