Arrange cutlery and crockery in baskets, Push baskets into machine, Close door – AEG FAVORIT 146 User Manual
Page 13: Check rinse-ald level indicator, Turn off the water tap, Operating procedure water softener
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Operating procedure
Water softener
If noi permanently connected, hang
the
outlet pipe over the sink and atta^ the
inlet hose to the
vrater tapL
Plug the maclilne Into the wall socket or,
In the case of a permanent connection,
switch on.
Turn on the water tap. Open the door.
Arrange cutlery and crockery In baskets.
Push baskets Into machine.
Put 2 level tablespoom of cleaning agent
In the dispenser, and when using the In
tensive programme, pour the same quan
tity into the door recess.
Close door.
Check rinse-ald level Indicator.
Check salt level Indicator for water softe
ner (see page 14).
Press programme button until the rinse
aid ievel Indicator ilghts up and the pro
gramme indicator moves from O-positlon
and the programme starts.
The programme indicator progresses with
the programme.
it remains stationary during the wash and
final rinse until the required temperature
has been reached.
When the programme Is finished, the
machine will stop automatically. Press the
off button. The rinse aid level indicator
light will go out.
Turn off the water tap.
Remove the plug from the wall socket, or
switch off. Do not remove the crockery
Immediately from the machine — leave It
in for a few minutes, with the door left
slightly ajar.
We recommend that you empty the lower
basket first and then the upper basket.
Your dishwasher has been provided with
a water softener, which gives you soft,
lime free water tor the rinses. This greatly
aids the cleaning process and prevents
chalky patches.
All you need to do is to top up the salt
container from lime 1o time.
Before using the machine for the first time,
lift out the lower basket, unscrew the cap
from the salt container and fill it with wa
ter. Place the funnel over the opening and
pour the salt into the container until it is
full to the top. Some water will overflow
which will be pumped off at the start of the
next programme.
Clean any surplus salt from the thread of
the container and replace the cap.
Replace the basket.
The machine is ready for use.
13