What to do h, The programme does not atari, Nowaterortooihuaweter – AEG FAVORIT 146 User Manual

Page 16: Dishes not dean, Dishes not sparking clean

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

What to do H . . .

If your dishwasher does not work, this is
often due to small things, which you can
put right yourself.

1. The programme does not atari

Have you plugged the machine in, have

you switched on the main switch?

Are the fuses alright?

Is the door closed properly?

Have you selected the correct pro­

gramme?

2. NowaterortooIHUaweter.

Have you turned the tap on?

Is the water filter In the filler hose clean?

It needs cleaning from time to time.

Is the water pressure sufficient?

This fault may also occur If incoming wa­

ter is drained due to the drain hose being
lower than the required 30 cm. from the
base of the machine.

Secure the outlet hose at the correct
height and to start the machine, supply

enough water to cover the heating ele­

ment. Then start the programme.

3. The water Immediately runs out again
from the outlet hose.

Is the outlet hose at least 30 cm above the

base of the appliance? Ensure that the
bend at the end of the hose Is not Im­
mersed In the pumped off water.

4. Dishes not dean

Did you select the correct programme?

Did you use sufficient detergent? Did you

usia the recommended detergent?

Did you add the detergent correctly?

Did you stack the dishes correctly?

Where the spray arms able to rotate
without obstruction?

16

5. Dishes not sparking clean.

Did you use a rinse aid recommends«
by us?

IS the correct quantity of rinse aid beini

dispensed?

If too little is used, marks are left, if to«
much is used, the dishes are smeared.

Was the screw cap of the salt contains
fastened securely?

Did you add salt for the water softener li

time?

If you forget this once the water softene

will work efficiently again by adding salt

After filling with salt, set the programme ii

motion by pressing the "automatic reset
button until the hand of the programm«

indicator reaches the final rinse symbol.

Press the intensive button to set the re
maining programme in motion. Fo
degrees of water hardness up to 20° d

temporarily set the slider at green, thei

re-set to orange or yellow.

Please use these hints for the smooth an<
satisfactory operation of the machine.

If you wish to avail yourself of our custo
mer service to rectify one of the abov«

faults, the necessary services cannot b«
supplied free of charge, even during th«
guarantee period. In other respects, plea
se see the guarantee terms as set out ii
the Customer Service Booklet. If yoi
cannot establish the cause of a fault, ge

in touch with our Customer Service DivI

Sion. You will make their job easier if yoi

are able to give them the E-No. and thi
serial number of the machine, which yoi
will find on the rating plate under thi
worktop.

The AEG ComprehensIveServiceContrac
offers you a wider guarantee. For a smal
annual payment you can sign a senriclnj
contract with our Customer Service Divi­
sion up to the 10th year of using your

appliances. This guarantees you free
rectification of all faults which may occur
In your appliance.

Advertising