Remote control sensor s), Disc 1 - disc-5 (d, Repeat m – Adcom GCD-700 User Manual
Page 7: Display panel, Track selection (1-10) and (+10) m, Program m, Random
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
REMOTE CONTROL SENSOR S)
Receives the infrared signal from the RC-700CD Remote Control. Aim the remote control here when using it.
DISC 1 - DISC-5 (D
These controls are used to select the disc that you want to play or program.
REPEAT
m
This button is used to select the desired repeat mode. The various modes are indicated by the status lights. When selected
THIS TRACK will repeat the song being played, THIS DISC will repeat all songs on that disc, and ALL DISCS will
repeat
all
discs that are loaded in the player.
DISPLAY PANEL ©
This shows the current disc number, track number, and elapsed playing time. It can also be used to display the playing time
remaining, the vojume level when selected by the remote control and programming information when applicable.
TRACK SELECTION (1-10) and (+10)
m
These buttons are used to select the track that you want to listen to or program. To select track 7, simply press button 7. To
select track 32, press the +10 button three times, then press button number 2.
PROGRAM
m
This control is used to select tracks for programming. Please see the section on PROGRAMMING THE GCD-700 for further
details.
RANDOM
®
This button is used to start the random function. In this mode, the GCD-700 plays tracks in a completely random order.
To use the random play feature proceed as follows:
•
Press RANDOM. The LED in the button will glow indicating that you are in the random mode.
• Press PLAY. On the display panel, you will see the player begin to shuffle all discs and tracks currently loaded in the unit
and then begin playing.
•
To stop playing,in the random mode, press RANDOM again. To stop playing completely, press STOP.
To select specific discs for random piay, proceed as foliows:
•
Press RANDOM.
•
Select the discs that you want to play using the DISC 1 through DISC 5 buttons.
•
Press PLAY. The GCD-700 will then begin playing back only those discs selected in Step 2. Again, to stop playing in the
random mode, press RANDOM a second time.
To use the random feature for preset tracks, proceed as follows:
•
Program the tracks you want to listen to. See the section on PROGRAMMING THE GCD-700 for details.
•
PRESS RANDOM.
•
Press PLAY. You will only hear the preset tracks in random order. To stop play in the random mode, press RANDOM
again.
NOTE
THE PROGRAM FUNCTION CANNOT BE ACCESSED WHEN THE RANDOM FUNCTION IS ON.