Memorizing the new dsp surround sound, 2 within 8 seconds, press enter, 4 within 8 seconds, press enter – Aiwa XR-M1000 User Manual
Page 11: To .select the stored dsp surround sound
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
MEMORIZING THE NEW DSP SURROUND
SOUND
Up to 5 DSP SURROUND sounds can be memorized as the
manual modes M1 - M5.
1
Set a new DSP SURROUND sound with DELAY
TIME, EFFECT, and MULTI JOG.
See “SETTING A NEW DSP SURROUND SOUND
MANUALLY”.
2
Within 8 seconds, press ENTER.
The pointer flashes to select one of the manual modes
M1 - M5.
CC
lU
N
□
<
3
a
Ul
o
X
a
<
fiC
o
• If this step is not completed within 8 seconds, press
SURROUND first to display “DSP ON” on the stereo receiver.
Then press ENTER within 4 seconds.
3
Within 8 seconds, turn MULTI JOG to select one
of the manual modes M1 - M5.
4
Within 8 seconds, press ENTER.
The new DSP SURROUND sound is memorized.
To .select the stored DSP SURROUND sound
Press SURROUND, and turn MULTI JOG to select one of the
manual modes Ml - M5 within 4 seconds.
At this time the corresponding graphic equalizer mode is selected
automatically.
NOTE
When the MIC or ECHO level is changed (page 18), the DSP
SURROUND mode is automatically canceled.
ENGLISH
11