The ashly cl-50e^ compressor/limiter, Gain, Attack – Ashly LIMITER/COMPRESSORS CL-100 User Manual
Page 10: Reduction, In/out, Ratio, Release, Introduction, Gain reduction
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
The Ashly CL-50E^ Compressor/Limiter
GAIN
Adjusts the input
sensitivity so gain
control action starts at
the proper signal level.
ATTACK
Adjusts the speed at
which the gain is
reduced in response to a
signal above the
threshold level.
GAIN
REDUCTION
This indicator displays
the gain control action of
the compressor/limiter.
ASHLY
asoe
Peak Detection
Compnessor/Umiter
Out
In
. Rctesso.
.OuCpcit Level.
.Gain Reduction [dB).
Power
•20
O
-10
O
-6
o
-3
Thp.
O O
IN/OUT
This switch enables or
defeats the action of the
compressor/limiter.
RATIO
Adjusts the “rigidity* of
the ceiling placed on the
signal levid.
RELEASE
Adjusts the speed at
which the gain is
increased as the signal
falls below the
threshold level.