Dynasty Spas 2006 - Manual (Page 10)

- 10 -
Factory Recommended G.F.C.I. Load Center Wiring
Wiring Diagram
Note: The white neutral wire from the
back of the GFCI MUST be
connected to an incoming line
neutral. The internal mechanism of
the GFCI requires this neutral
connection. The GFCI will not work
without it.
Wiring Requirements
• 2-Hots, 1-Neutral, 1-Isolated Ground
• (under 40 ft wire length) 4 Wire #8 AWG solid copper conductor
• (over 40 ft wire length) 4 Wire #6 AWG solid copper conductor
(from spa
system box)
Spa System Box