Q-See Q25DVR4ES - Manual (Page 11)

Q-See Q25DVR4ES User’s Manual
Page 11
User can setup video recording method by Time, Motion Triggered and Continuous
Recording.
When the function is set to be “ON”, DVR will be awaked to record automatically
by schedule if DVR is without any manual operations in five minutes.
When you choose “OFF”, DVR will not record until you press the [RECORD]
button.
When this option is set to be “ON”, you will be required to enter the password if
you want to stop recording or enter menus.
Chapter 5: DVR Setup - 5.7 Schedule Set
“-” No Recording.
“T” Continuous (System Default).
“A” Motion Triggered.
[ ] Up / [ ]Down: To move the prompt.
[ ] Select: To select Method.
Numbers along bottom are hours of the day
Chapter 5: DVR Setup - 5.8 Sub Menu-Auto Record
Chapter 5: DVR Setup - 5.9 Sub Menu-Password Enable
SCHEDULE SET
TTTAAATTTTTTAATTTTT
-- -- -- --AAT
│ │ │ │ │ │ │ │ │
0 3 6 9 12 15 18 21 24
PRESS (UP ， ， ， ，DOWN), ENTER (SELECT)
PRESS (MENU) TO EXIT