Q-See Q25DVR4ES - Manual (Page 16)

Q-See Q25DVR4ES User’s Manual
Page 16
Press [ Record] to start recording (As set in 5.7 Schedule Set ).
System will display information on Screen.
NOTE: Only EACH Mode can enlarge single channel to full screen display.
1. Hard Drive Usage (Displayed as a percentage)
2. Recording Symbol (channel is currently recording)
3. Channel Name
4. Mode (QUAD or EACH)
5. Status (REC, Play, FF1, FF2, FF3, REW, PAUSE)
6. HD Info. ([M] Master Hard disk)
7. Schedule settings: (T) Continuous (A) Motion (-) No Recording
8. The time and date on the DVR
Press [ Stop] and system will prompt you to input password if you have already
activated the password. If password option is disabled [ Stop] will not stop
recording.
Chapter 6: Recording - 6.1 Start Recording
Chapter 6: Recording - 6.2 Stop Recording
QUAD REC [M] (T) 2008/07/01 16:22:30
10%
R
R
R
R
1
3
2
4 5 6 7 8