Acreative 820HD - Manual (Page 6)

-4-
Wire Antenna
1) If all the desired FM stations have strong signal strength,
the wire antenna can be used. It is the easiest of the three
antennas to install and conceal.
2) Connect the wire antenna to the SoundWorks Radio
820HD by pushing the connector plug onto the FM an-
tenna input.
3) The wire antenna can work well simply hanging down
from the back of a desk or bookcase. Experiment with the
position of the antenna wire, keeping it as straight and
extended as possible.
If you find a single position for the antenna that receives
all stations well, tape it in place. Reposition the antenna as
required to get the best signal for the desired station.
Two Orientations for the
Wire Antenna
If there is a wall behind
the radio, let the antenna
hang straight down.
Run the wire antenna
along the edge of a table
or just underneath the
edge of the table.
1.
2.