Acreative 820HD - Manual (Page 7)

-5-
2) 1)
3) 4)
AM Antenna
1) Identify the AM Antenna.
2) Fold the base as shown.
3) Snap the tab on the loop into the slot in the base to
complete the AM Antenna assembly. Be careful not to
pinch the connecting wire.
4) The finished antenna will stand upright, as shown.
5) Insert the AM Antenna plug into the AM antenna input,
which is directly underneath the FM antenna input.
6) Position the AM antenna 8 inches away from AC power
lines or equipment to minimize AM interference.
The AM Antenna is mildly directional, so rotate it to find
the best signal for each AM station. A single position can
often be found that works well with all AM stations of
interest. 5)