Dolby Laboratories 6000 - Manual (Page 17)

-16-
audio channel, press ENTER to confirm the selection.
Three play modes are available: Sequential, Programmed
and Random.
PBC
When PBC is “ON”, the system will display the
menu of VCD, use digit key to select what you
like. When PBC is “OFF”, system will be in
sequential play mode.
REPEAT
Repeat play function. Use / to move the
cursor to the icon, use / , REPEAT or
ENTER to select required repeat play function,
and to confirm the selection.
a. Repeat a chapter.
Push REPEAT or use / , the screen shows:
b. Repeat a disc
Push REPEAT again or use / , the screen shows:
c. Remove REPEAT function.
Push REPEAT again or use / , to cancel the repeat
function. The screen display:
REPEAT A-B
Repeat play from A to B selected. Use / to
move the cursor to the icon, use / , A-B or
ENTER to select required repeat play function, and to
confirm the selection.
a. Press A-B , set a starting point A. The screen shows:
A- B
b. Press A-B again, set a point B. The screen shows:
A- B
Afterwards, the unit plays from A to B.
c. Then press A-B , remove A-B repeat.
Notes: Only press A-B or / to remove A-B repeat.
BOOK/ MARK
Set a bookmark. Use / to move the cursor
to the icon, use digit keys to select required
position, press ENTER to confirm the selection.
At maximum five bookmarks (1,2,3,4,5) can be set. This
operation is valid only when “BOOKMARK” is
displayed on OSD. You may also use
/ to move the
cursor to a bookmark and press ENTER to jump to the
position set and play.
3. When playing CD
Push DISPLAY, The TV screen shows the information
about the disc.
TRACK
Display current track. Use / to move the
cursor to the icon, use / or Digit Keys to
select required track, press ENTER to confirm the
selection.
TIME
Display current time. Use / to move the
cursor to 00:00:00, input time by pressing digit
key, press ENTER to confirm the time setting.
PLAY MODE
Play mode selection. Use / to move the
cursor to the icon, use / to select required
audio channel.