Dolby Laboratories 6000 - Manual (Page 25)

-24-
AUDIO SETUP PAGE
ANALOG OUTPUT
DIGITAL OUTPUT
RETURN
PVR
DVD
SETTING
EXIT
ANALOG OUTPUT
ANALOG OUTPUT
DIGITAL OUTPUT
RETURN
PVR
DVD
SETTING
EXIT
2 CHANNEL
5.1 CHA NNEL
AUDIO SETUP PAGE
2 CHANNEL: Down Mix to left and the right track
as output.
5.1 CHANNEL: Switch to 5.1channel output: left,
Right, Rear Left, Rear Right, Center and Subwoofer.
DIGITAL OUTPUT
Use / to move the cursor and select “DIGITAL
OUTPUT”, the screen show:
ANALOG OUTPUT
DIGITAL OUTPUT
RETURN
PVR
DVD
SETTING
EXIT
AUDIO SETUP PAGE
DOLBY DTS
LPCM
DOLBY DTS: Select this when the HDD video
recorder is connected to an amplifier Dolby or DTS
decoder.
LPCM: Select this if you want to have high quality
output. But only 2 channel output.
VIDEO SETUP
Use / to move the cursor and select “VIDEO
SETUP”, the screen show:
VIDEO SETUP PAGE
PVR
DVD
SETTING
EXIT
VIDEO SYSTEM
SCREEN ASPECT
VIDEO OUTPUT
RETURN
VIDEO SYSTEM
VIDEO SETUP PAGE
PVR
DVD
SETTING
EXIT
VIDEO SYSTEM
SCREEN ASPECT
VIDEO OUTPUT
RETURN
NTSC
PAL
You can select NTSC or PAL according TV system of
TV set.
Select “NTSC” for a NTSC TV system output.
Select “PAL” for a PAL TV system output.
SCREEN ASPECT
Use / to move the cursor and select “SCREEN
ASPECT”, the screen show:
VIDEO SETUP PAGE
PVR
DVD
SETTING
EXIT
VIDEO SYSTEM
SCREEN ASPECT
VIDEO OUTPUT
RETURN
16:9 WS
4:3 LB
4:3 PS
Select “16:9 WS”: This is selected when the unit is
connected with a wide-screen TV.
Select “4:3 LB”: This is selected when the unit is
connected with a normal TV. Wide-screen images
are shown on screen, with black belts on the top and
bottom.
Select “4:3 PS”: This is selected when the unit is
connected with a normal TV. Wide-screen images
are shown on the screen, but with some parts cut
automatically.
VIDEO OUTPUT
Use / to move the cursor to the icon and select
“VIDEO OUTPUT”, the screen show:
VIDEO SETUP PAGE
PVR
DVD
SETTING
EXIT
VIDEO SYSTEM
SCREEN ASPECT
VIDEO OUTPUT
RETURN YCrCb
SCART
YCrCb: The OUTPUT is in YCrCb.
SCART: The OUTPUT is in SCART.