3xLOGIC VIGIL Client - Manual (Page 12)

3xLOGIC’s VIGIL Client - Users Guide Page 12
Doc# 12031914
Live Overlay
Use Live Overlay
From Card Capture
Card
Enables live overlay features from an installed capture card to be used. Select the input number
from the drop-down menu.
Note: For this feature to function properly Live Overlay must be enabled in the Settings |
Hardware section and the capture card drivers must be installed.
Input Number Select the input number for the live overlay from the drop-down menu.
Poll Server Data
Poll Server Data
Enable Polling of Server Alarms and Live POS/ATM Data from the DVR Server. The frequency of
polling can also be configured.
5.2 DVR Settings
To access a remote server’s DVR settings, VIGIL Client must be connected to the server with administrative
privileges. Select a server from the list and click Connect. If the default user does not have administrative
privileges, use Connect As to login as an administrator.
DVR Recorder Tab
From this window, cameras can be set to start or stop recording, the server can be rebooted or updated, and
basic information about the operating performance of the DVR is displayed.
Start Starts recording on the currently selected camera(s).
Stop Stops recording on the currently selected camera(s).
Reboot Restarts the server. Warning: This action will restart the server and take it temporarily offline.