3xLOGIC VIGIL Client - Manual (Page 81)

3xLOGIC’s VIGIL Client - Users Guide Page 81
Doc# 12031914
14.9 Sitemaps Tab
The Sitemaps tab instructs VIGIL Client where to locate sitemap files.
Top Level Maps
Location
Enter the path to the top level sitemaps or click the button to browse to the location.
14.10 Transcoder Tab
The Transcoder tab allows configuration of up to four video transcoders to recode video and display it on an
analog monitor. For more information, please contact 3xLOGIC.
Constant
Quality/Bitrate
Selects the type of encoding. Constant Quality will ensure the quality of the encoding never falls
below a certain threshold (Low, Medium, High and Super-High) but at the expense of playback
performance (reduced frame rates and skipping/jumpiness). Selecting Constant Bitrate will ensure a
constant Bitrate is sent, at the expense of image quality. For high frame rate/high motion video
feeds, it will help the playback performance, improving video smoothness.
Deinterlacing Addresses interlacing issues that may occur on high resolution video feeds.
Enabled Enables the corresponding transcoder.
Register, Control,
Streaming Ports
Changes the ports to use to connect to the transcoder. Refer to the documentation of the video
transcoder to correctly set these ports.
Auto Link When enabled, establishes an automatic connection with the transcoder.
14.11 Virtual Switch Tab
The Virtual Switch tab allows configuration of up to eight digital (PC) or analog monitor outputs.
Digital
The digital virtual switch feature allows users to configure additional PC monitors to display up to 16
simultaneous live camera feeds per PC monitor. Users are able to access and control all cameras
from DVR sites, whether they are analog, network, or PTZ cameras, all without the need for a
KBD300 keyboard.
Analog
The analog virtual switch allows live viewing or playback of one camera per analog monitor
connected to the VIGIL Client system.