General questions – Daxten Voyager 300 User Manual

Page 13

Advertising
background image

13

Is it possible to use a cable length of more than 300m?

The Voyager has been designed to produce acceptable results with Super VGA

resolutions at the maximum cable length 400M. It may be possible to run up to 400

meters. The signal needs to bee restored. So the maximum is 400 m in 1024x768 at

75hZ. It depends on the cable quality. Cat 6 is designed for 200MHZ bandwidth Cat5

Works only in 100MHZ

Why do I have a skew delay in my cables

The pairs inside the cable are twisted different to reduce cross talk. Cat6 use more twist

than cat5. When you increase the resolution the need for compensation raise.

Can Voyager units be chained to allow operation over more than 400m/1200ft?

Daisy chain gives delay on mouse and keyboard functions and equalisers is required. If

you plan to cascade units, please contact technical support to discuss your application.

Can I add several working spots to one PC ?

Yes use one USB/PS2 converter for every local. The local units will obtain their own

HID number from the OS. Please remark USB dongels behave different and might not

work with the OS or the local unit. Please contact technical support to discuss your

application.

Which cable is better UTP or STP?

UTP cable will give the best quality video over long distances because it has less

capacitance per unit length. However, STP may be a better choice in electrically noisy

environments.

When using UTP what is the best way to ensure the system does not suffer from

any interference?

This product is designed to withstand high levels of interference whilst using UTP over

long distances. To further reduce the potential for interference consider the following:

a) Ensuring that the computer and remote monitor are both connected to the same

mains phase.

b) Ensuring that the AC voltage across the mains grounds (at the local PC & remote

monitor) is less than 2V.

c) Using a clean earth system (if your site has one installed).

d) Routing the interconnection cable away from other cables.

e) Trying STP cable if you think noise could be a problem.

Is the Voyager suitable for use between buildings?

The Voyager does not have line isolation. Therefore, operation between buildings is not

recommended.

Is the Voyager connectable to my network?

GENERAL QUESTIONS

Advertising