Daxten Voyager 300 - Manual (Page 7)

7
9-20V DC UTP Monitor KEY MOUSE
VGA out UTP in 5 V DC KEY MOUSE
The Voyager consists of a Local and a Remote Unit interconnected by a single
structured cable that carries all the necessary signals. The Local unit is connected to the
PCs keyboard, VGA ports and PS/2 mouse. The keyboard, monitor and mouse are
connected directly to the Remote Unit. The Remote Unit is powered by a power supply
whilst the PC powers the Local Unit. An optional local PSU is available for PC’s that
do not have enough power available on the keyboard port.
We recommend that the complete system should be tested in one room before
permanent installation. If a long interconnect cable is not available, use a patch
lead to test basic unit operation with your PC.
QUICK SETUP SYSTEM GUIDE
PROCEDURE