Acrosser AR-B5630 - Manual (Page 12)

Revision: 2.0
12
2.2 Connector and Jumper Setting Table
1. PWR2: External +12V
DC power input
connector. 2. CON2: ATX function
connector. 3. CON3: Extra +12V and +5V
DC power output connector
(for SATA device).
PIN SETTING
1 GND
2 GND
3 +12V
4 +12V
PIN SETTING
1 GND
2 PS_ON
3 +5V_SUS
PIN SETTING
1 +12V
2 GND
3 +3.3V
4 +5V
4. J10: PCI-104
connector. 5. JP2: Signal SERIRQ
connects to PCI-104 pin #B2
selection. 6. J5: CMOS data
retention/clear.
PCI-104
connector.
STATUS SETTING
Open
Disconnected.
(Default)
Short Connected.
STATUS SETTING
Open
Disconnected.
(Default)
Short Connected.
7. BAT1: CMOS battery
holder. 8. SATA1: SATA device
connector #2. 9. J8: CF master or slave
select.
CMOS battery
holder. SATA device connector
#2.
STATUS SIGNAL
SHORT MASTER
OPEN SLAVE(Default)