Acrosser AR-B5630 - Manual (Page 29)

Revision: 2.0
29
3.9 BIOS Update
The BIOS program instructions are contained within computer chips called FLASH ROMs that
are located on your system board. The chips can be electronically reprogrammed, allowing you to
upgrade your BIOS firmware without removing and installing chips.
The AR-B5630 provides the FLASH BIOS update function for you to easily to update to a newer
BIOS version. Please follow these operating steps to update to new BIOS：
Step 1: Turn on your system and don’t detect the CONFIG.SYS and
AUTOEXEC.BAT files.
Step 2: You will get AWDFLASH.EXE and XXXXXX.BIN , please copy them to the
boot disk .
Step 3: In the MS-DOS mode, you can type the AWDFLASH and press [ ENTER ] .
A:\> AWDFLASH
Step 4: A window will appear and ask you to type the complete BIOS file
( xxxxxx.BIN ) and
press [ ENTER ] .
Step 5: Then it will ask whether you save the old BIOS file , you can choose the
YES or NO .
Step 6: Then it will ask you whether want to program it , please choose YES .
Step 7: The BIOS will start to upgrade
Step 8: When you have successfully flashed the BIOS then press the[F1] to reboot
the Computer and hit [DEL] to enter the BIOS CMOS SETTING .
Select " LOAD S-STUP DEFAULTS " set as YES . Then save and exit the
setting
Note：
1. In order to prevent your system from hanging up during flashing BIOS , please check the new
BIOS match your model name and current BIOS version .
2. In order to protect your motherboard , please don’t turn off your computer during the flashing or
it will damage your BIOS ROM .