Acrosser AR-B5630 - Manual (Page 5)

Revision: 2.0
5
1
INTRODUCTION
Welcome to the AR-B5630 ECIP AT/ATX Single Board Computer. The AR-B5630 is EPIC
board with Socket P Intel Core™2 Duo or Core Duo or Core Solo and Celeron M processor and
Intel GM965 + ICH8M Chipset. The memory contents one DDR2 SO-DIMM socket which supports
up to 2GB of memory. Graphics display functionality is provided by Build-in Graphic Processor that
supports CRT display and LVDS interface with Single or Dual channel panel specifications.
Ethernet connectivity comes from the Intel WG82574L10/100/1000 M Ethernet controller.
1.1 Features
 Processor: Core 2 Duo, Core Duo and Celeron M
 Chipsets: GME965 + ICH8M
 Memory: DDR2 667MHz SO-DIMM, Maximum 2GB
 Display: VGA, DVI, LVDS, S-Video, BNC, Component video
 Storage: 1x CF, 1x SATA II, 1x IDE
 Audio: 5.1 CH Audio Realtek ALC662
 Communication: 2x Gbps Ethernet, 4x USB 2.0, 3x RS-232, 1x RS-232/422/485
 General: Watchdog timer, 8-bit GPIO, and PCI-104 expansion slot.
Specifications
Model Name  AR-B5630 V 2.0
Product
Descriptions EPIC SBC support 65nm Intel uFC-PGA 478 Core 2 Duo/Core Duo/Core
Solo/Celeron M Processors with Dual Gigabit LANs / LCD / TV out / DVI
General Note
CPU
 Socket for Intel uFC-PGA 478 Core 2 Duo/Core
Duo/Core Solo/Celeron M, Coolers required.
BIOS AWARD
System Chipsets  Intel GM965 + ICH8M
System Memory  One SO-DIMM socket support 667/533 MHz DDR2
SDRAM up to 2GB
Watchdog Timer Software programmable 1~255 Seconds
Battery Lithium Battery, 3V 220mAH For RTC
Power
Requirements  AT: 12V Single Voltage Input
 ATX: power switch pin header and pin header for
external 5V stand-by input
Pin Header
Hardware
monitoring 1. CPU voltage
2. CPU and System Temperature
3. System and CPU FAN speed
4. System Fan Speed Control same as AR-B1892
(connector color different from CPU Fan connector)
BIOS Support
ProtectU N/A