Acrosser AR-B5495 User Manual
Page 28
Advertising
24
Installing the Motherboard
Connecting Case Components
After you have installed the motherboard into a case, you can begin connecting the
motherboard components. Refer to the following:
1
Connect the system cooling fan connector to SYS_FAN.
2
Connect the case switches and indicator LEDs to the PANEL1.
3
Connect the standard power supply connector to ATX_POWER1.
The power 20-pin connector allows you to connect to ATX v2.x power
supply.
Connecting 20-pin power cable
20-pin power cable
Users please note that when installing 20-
pin power cable, the latche of power cable
falls on the left side of the ATX_POWER1
connector latch, just as the picture shows.
Advertising