Acrosser AR-B5495 - Manual (Page 42)

38
Using BIOS
ACPI Suspend Type (S3 (STR))
Use this item to define how your system suspends. In the default, S3, the suspend
mode is a suspend to RAM, i.e, the system shuts down with the exception of a refresh
current to the system memory .
PWRON After PWR-Fail (Power Off)
This item enables your computer to automatically restart or return to its operating
status.
Power On by Ring (Disabled)
The system can be turned off with a software command. If you enable this item,
thesystem can automatically resume if there is an incoming call on the Modem.
Youmust use an ATX power supply in order to use this feature.
Resume By PCI/Lan PME (Enabled)
These items specify whether the system will be awakened from power saving modes
when activity or input signal of the specified hardware peripheral or component is
detected.
Resume By USB (S3) (Disabled)
This item allows you to enable/disable the USB device wakeup function from S3/S4
mode.
Resume By PS2 KB (S3) (Disabled)
This item enable or disable you to allow keyboard activity to awaken the system
from power saving mode.
Resume on RTC Alarm (Disabled)
The system can be turned off with a software command. If you enable this item, the
system can automatically resume at a fixed time based on the system’s RTC (realtime
clock). Use the items below this one to set the date and time of the wake-up alarm.
You must use an ATX power supply in order to use this feature.
Press <Esc> to return to the main menu setting page.