3 device id, Device id, Figure 2-2 – ADLINK USB-2405 User Manual
Page 29: Device id selection control
Advertising
Getting Started
19
USB-2405
2.3
Device ID
A rotary control on the rear of the module (as shown) controls
device ID setting and can be set from 0 to 7. The device ID allows
dedicated control of the USB-2405 module irrespective of the con-
nected USB port. When more than one USB module of the same
type is connected, each must be set to a different ID to avoid con-
flicts and errors in operation.
Figure 2-2: Device ID Selection Control
Advertising