ADLINK PXI-2208 - Manual (Page 33)

Signal Connections 21
3 Signal Connections
This chapter describes DAQ-/DAQe-/PXI-2204/2205/2206/2208
card connectors and the signal connection between the DAQ-/
DAQe-/PXI-2204/2205/2206/2208 card and external devices.
3.1 Connectors Pin Assignment
The DAQ-/DAQe-/PXI-2204/2205/2206/2208 card is equipped
with two 68-pin VHDCI-type connector (AMP-787254-1). It is used
for digital input/output, analog input/output, timer/counter signals,
etc. One 20-pin ribbon male connector is used for SSI (System
Synchronous Interface) in DAQ-/DAQe-2204/2205/2206/2208
card. The pin assignments of the connectors are defined in
Table 3-1, Table 3-2, Table 3-3, and Table 3-4.