ADLINK cPCI-7249R - Manual (Page 47)

C/C++ Libraries • 39
5.8 Set Interrupt Control
@ Description
This function is used to set the interrupt configuration. The interrupt
should be configured before the function starts.
@ Syntax
C/C++ (DOS)
void _7248_Set_INT_Control(U16 cardNo, U16 ctrlValue);
void _7249_Set_INT_Control(U16 cardNo, U16 ctrlValue);
void _7296_Set_INT_Control(U16 cardNo, U16 ctrlValue);
C/C++ (Windows 95)
void W_7248_Set_INT_Control(U16 cardNo, U16 ctrlValue);
void W_7249_Set_INT_Control(U16 cardNo, U16 ctrlValue);
void W_7296_Set_INT_Control(U16 cardNo, U16 ctrlValue);
Visual Basic (Windows 95)
W_7248_Set_INT_Control (ByVal cardNo As Integer, ByVal
ctrlValue As Integer)
W_7249_Set_INT_Control (ByVal cardNo As Integer, ByVal
ctrlValue As Integer)
W_7296_Set_INT_Control (ByVal cardNo As Integer, ByVal
ctrlValue As Integer)
@ Argument
cardNo: card number to select board
ctrlValue: the valid values of configuring the interrupt
are
INT1:
0x00 Æ disable
0x01 Æ mode1
0x02 Æ mode2
0x03 Æ mode3
INT2:
0x00 Æ disable
0x04 Æ mode1
0x08 Æ mode2
0x0c Æ mode3
Please refer to the section 4.3.4 for detailed description.