ADLINK cPCI-7249R - Manual (Page 55)

C/C++ Libraries • 47
@ Argument
cardNo: card number which the DIO will be reset.
c1: If the interrupt source is set as internal timer
source, this value is the frequency divider of
Timer#1.
c2: If the interrupt source is set as internal timer
source, this value is the frequency divider of
Timer#2.
ctrlValue: the value for INT mode setting. The value can
be set for INT1 is INT1_OFF, INT1_P1C0,
INT1_P1C3C0, or INT1_EVENT_IRQ. The value can be
set for INT2 is INT2_OFF, INT2_P2C0, INT2_P2C3C0,
or INT2_TIMER_IRQ. Please refer to section 3.3.4
for detailed description.
hIntEvent:the handle of the event for interrupt signals.
@ Return Code
ERR_NoError
5.17 Interrupt Stop under Windows
@ Description
This function is only available in Windows 95/98 driver. This function is used
to disable the interrupt signal generation.
@ Syntax
C/C++ (Windows 95)
void W_7248_INT_Stop (U16 cardNo)
void W_7249_INT_Stop (U16 cardNo)
void W_7296_INT_Stop (U16 cardNo)
Visual Basic (Windows 95)
W_7248_INT_Stop (ByVal cardNo As Integer)
W_7249_INT_Stop (ByVal cardNo As Integer)
W_7296_INT_Stop (ByVal cardNo As Integer)
@ Argument
cardNo: card number which the DIO will be reset.
@ Return Code
ERR_NoError