3 getting started, 1 removing a node tray from the chassis, 2 installing the cpu – ADLINK MCS-2040 User Manual
Page 13: Removing a node tray from the chassis, Installing the cpu
Advertising
13
MCS-2040
3 Getting Started
3.1 Removing a Node Tray from the Chassis
1. Unlock the node tray by pulling the lever to the right as shown
2. Pull the node tray out of the chassis. It may be necessary to pull very firmly to unplug
the SATA drive connectors inside the chassis.
3.2 Installing the CPU
1. Locate the CPU sockets on the board.
Advertising