6 installing 2.5’’ sata drive, Installing 2.5’’ sata drive – ADLINK MCS-2040 User Manual
Page 19
Advertising
19
MCS-2040
3.6 Installing 2.5’’ SATA Drive
1. Push the green tab to unlock the drive tray.
2. Eject the drive tray by lifting the handle as shown. Pull the tray out of the chassis.
3. Loosen the 4 screws shown below and remove the plastic place holder. Install a 2.5’’
SATA drive with the connectors facing towards the back of the tray. Secure the SATA
drive to the bracket with the 4 screws.
Advertising