ADLINK MCS-2040 - Manual (Page 29)

29
MCS-2040
F4
The < F4 > key allows you to save any changes you have made and exit
Setup. Press the < F4 > key to save your changes. The following screen
will appear:
Press the < Enter > key to save the configuration and exit. You can also
use the < Arrow > key to select Cancel and then press the < Enter > key
to abort this function and return to the previous screen.
ESC The < Esc > key allows you to discard any changes you have made and exit
the Setup. Press the < Esc > key to exit the setup without saving your
changes. The following screen will appear:
Press the < Enter > key to discard changes and exit. You can also use the
< Arrow > key to select Cancel and then press the < Enter > key to abort
this function and return to the previous screen.