Altech UEC PVR9600T High Definition Triple Tuner - Manual (Page 31)

Page 31 of 52
For assistance:
[email protected]
www.uec.com.au
Changing Channels
There are several methods in changing channels.
• Press CH+/CH- buttons to change the channel to the next/previous channel respectively
• On i-Plate, press < / > buttons to navigate to different channels and press OK to select
• On TV Guide, press ^ / buttons to navigate to up / down the channels and press OK to select
• Press a valid channel number
• Selecting a channel in the channel list menu
Changing between TV & Radio Channels
• Press TV on the remote to tune to TV channels
• Press RADIO on the remote to tune to radio channels
Blocking Channels
This set top box has a blocking channel feature to control viewing in your home. A PG Pin is required
to access a blocked channel. To mark a channel for blocking: Menu Settings Channels. Scroll up/
down and press the button.
Favourite Channels
This feature allows you to create your favourite channels list for quick access. To mark a favourite
channel: Menu Settings Channels. Scroll up/down and press the button.
Simply press the FAV
button on the remote continuously to scroll to your favourite channel and press OK to tune.
Volume and Mute
Press V+ / V- to increase/decrease the volume level. A volume bar will appear on the screen when
adjusting the volume and disappears after 5 seconds.
Press the button to disable the volume. A mute icon ( ) will appear on the screen and disappears
after 5 seconds. If the set top box is muted and the user presses the V+ / V- buttons, the volume will
revert to its previous setting.
^