Altech UEC PVR9600T High Definition Triple Tuner - Manual (Page 8)

Page 8 of 52
For assistance:
[email protected]
www.uec.com.au
Carefully remove set top box from the packaging. Insert the supplied batteries into the remote control
paying attention to the +/- indicators. Connection options are listed below, it is important to ensure
that all connections are secure before connecting the set top box and power pack to the mains.
Direct to TV connection
Option 1: HDMI Connection (High Definition TV)
• Connect the terrestrial antenna to the Antenna IN on the set top box.
• Connect a HDMI cable to the HDMI connector on the set top box and then connect the other end
of the cable to the HDMI input on the TV.
Option 2: AV Connection (Standard Definition TV)
• Connect the terrestrial antenna to the Antenna IN on the set top box.
• Connect the Audio / Video (AV) cables to the Audio (Red and White) and Video (Yellow) outputs
on the set top box and the other end to the audio and video (AV) inputs on the TV.
INSTALLATION & CONNECTION OF THE PVR 9600
HDMI Inputs
AV Inputs
Option 2
Option 1