Altech UEC PVR9600T High Definition Triple Tuner - Manual (Page 35)

Page 35 of 52
For assistance:
[email protected]
www.uec.com.au
Software Upgrade
via USB
Software upgrade is done by
plugging an external USB
device containing a valid
software upgrade file. Go to
Menu Settings Device
Info Check for updates.
Software Upgrade
via Internet
If no upgrade on USB is found
a banner will appear asking
to check for upgrade via
Internet. Click OK to continue
or EXIT to cancel.
NOTE: The set top box
provides automatic upgrades
via Internet. Default setting
for this menu is DISABLED.
You can ENABLE automatic
upgrades by going to: Menu
Settings General
Automatic upgrades
Enable
SOFTWARE UPGRADE